Shawn Cassidy
Member
Hi,
Just started working on a new project. The machine has an Allen-Bradley MicroLogix 1500 and a Panelview Plus 700 touch. The original PV program was written for a PV Plus 600 touch. Can the existing program be converted to work with the 700? Is there anything that I should be aware of? Also, the 700 comes with a built-in Ethernet port. Can this port be used as a pass through to the ML1500? The customer wants to do data collection and possibly program the HMI and PLC remotely. I've looked for the info on the AB site and it appears the port can be used as a pass through, but I thought I would make certain with someone that has had experience with this screen. I could generate tags in the HMI for the data collection if needed.
Any help would be greatly appreciated.
Just started working on a new project. The machine has an Allen-Bradley MicroLogix 1500 and a Panelview Plus 700 touch. The original PV program was written for a PV Plus 600 touch. Can the existing program be converted to work with the 700? Is there anything that I should be aware of? Also, the 700 comes with a built-in Ethernet port. Can this port be used as a pass through to the ML1500? The customer wants to do data collection and possibly program the HMI and PLC remotely. I've looked for the info on the AB site and it appears the port can be used as a pass through, but I thought I would make certain with someone that has had experience with this screen. I could generate tags in the HMI for the data collection if needed.
Any help would be greatly appreciated.