Panelview plus 7 batch script

stu

Member
S
Join Date
Aug 2005
Location
England
Posts
786
Hi guys
I have had a thought regarding a quick hmi screen change for none experienced staff , is there a way that we can have a sd card or a usb with a batch script on to automatic add the correct IP address and the correct program , has anyone done this ? I would like to make the engineers life a bit easier
Any information would help thanks
Stu
 
This sounds more complicated to do than just teaching them how to do it, unless I seriously overestimate your engineers!
 

Similar Topics

D
Panelview 1000e to Panelview plus 7 (std) conversion
I’m running short on time to complete this project (retirement looming), so thought I’d ask here hopefully save me some research time. I’m...
Replies
1
Views
38
Ken Roach
Ken Roach
C
Panelview Plus 7 Help
I've adjusted the IP of the Panelview Plus as well as the DNS servers; the screen does not show up in the search when I go to the transfer utility...
Replies
7
Views
172
chall234
C
S
A&B Panelview plus 7
Replaced overlay and glass in HMI but now I can not calibrate the touch screen any suggestions.
Replies
1
Views
87
arpus4KM
A
S
Panelview Plus 7 Std Series D - Screen Navigation Issues
I'm at a loss here and hoping someone else has seen this: Background: We've got two identical machines on our floor (we'll call them machine A &...
Replies
0
Views
91
Super Steve
S
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
146
jscampbell210
J
Back
Top Bottom