Panelview Plus 7 to Modicon M580
- Thread starter Naval2069
- Start date
You will need to use Kepware. It comes "onboard" the PVP7, but you will have to flash the firmware and check the box to select the relevant drivers.
Search this forum for PanelView Plus and Kepware and you'll find plenty of threads on the topic; if you have specific queries post back with some more details!
Search this forum for PanelView Plus and Kepware and you'll find plenty of threads on the topic; if you have specific queries post back with some more details!
PLCParamedic
Member
M580 has an in rack OPC UA server module BMENUA0100 that goes in the rack. The module converts all M580 tags( modbus addressed or unlocated tags) into OPC UA tags. You can use any OPC UA client or Kepware OPC client to connect the in rack OPC UA server module on the M580
https://www.se.com/ww/en/product/BMENUA0100/opc-ua-module-for-m580/
Hope this helps
https://www.se.com/ww/en/product/BMENUA0100/opc-ua-module-for-m580/
Hope this helps
Similar Topics
Hey guys !
I made an application with factorytalk view , created tag with Kepserver connected to the different automat adress and configured my...
Has anyone programmed a PV+ to talk to a modicon system? How do i reference the addresses in the controller.i would be using rsview ME
I'm at a loss here and hoping someone else has seen this:
Background:
We've got two identical machines on our floor (we'll call them machine A &...
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Hi Everyone,
Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...