PanelView Plus 7

YellowRobot

Member
Y
Join Date
Dec 2023
Location
East Coast
Posts
4
Hello everyone. This is more of an HMI issue. I have a new PanelView Plus 7 Series B. I am using the alarm list object to display the fault history. This is working as it should. The issue I am seeing is that the faults are disappearing after several hours without being manually cleared. They are being logged and displayed correctly and the max number of alarm entries is set to 1000, but they still disappear one by one after a few hours. Does anyone know if this is a known issue with the series b PanelView?
 

Similar Topics

J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
97
jscampbell210
J
C
Adding PanelView Plus 7 to the network
Hi Everyone, Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Replies
0
Views
60
celso3093
C
F
PanelView Plus and .CRV Files
Hello All! Ok, we got a Work cell from a Integrator that is sending saved scanning data from the PLC to HMI (Panel View Plus) when I look at this...
Replies
3
Views
94
Foxtrot2050
F
J
FactoryTalk View Studio, Panelview Plus 6 1000, Edit alarm message
Hello, I made a change in alarm setup in factory view studio, where I changed a alarm message text. After that I made a run application and...
Replies
0
Views
142
Jako
J
A
PanelView Plus 700 PLC5/20
Replies
10
Views
328
AdamY
A
Back
Top Bottom