harryting
Lifetime Supporting Member
I haven't messed with ControlNet or Panelview + in a long while so I appreciate someone give me some pointers.
Trying to install a new PV+ on controlnet, the reason is this location got ControlNet remote IO but no Ethernet. This site also got Ethernet but it's between the PLCs and not IOs.
From KB 758626, it seems easy to add the controller into the Target in RSLinx Enterprise. However, there are two other controller on the Ethernet that I also want the PV+ to talk to. Is this possible? Do I just need to add the network topology into RSLInx Enterprise?
Thanks,
ETA: I'm doing unscheduled ControlNet if that matters.
Trying to install a new PV+ on controlnet, the reason is this location got ControlNet remote IO but no Ethernet. This site also got Ethernet but it's between the PLCs and not IOs.
From KB 758626, it seems easy to add the controller into the Target in RSLinx Enterprise. However, there are two other controller on the Ethernet that I also want the PV+ to talk to. Is this possible? Do I just need to add the network topology into RSLInx Enterprise?
Thanks,
ETA: I'm doing unscheduled ControlNet if that matters.
Last edited: