blmccallum
Member
I am trying to setup a PanelView 600 Plus to work with a MicroLogix 1200 Series C processor using a 1761-NET-ENI Series D ethernet adaptor. The PanelView and adaptor are connected to an ethernet switch.
Adaptor IP - 192.168.1.46
PanelView IP - 192.168.1.47
I can go online with the processor and program the PanelView with my PC via ethernet switch, but I cannot get the PanelView to communicate with the processor.
I have the RSView application shortcut set to the adaptor IP.
I am using the ENI Utility software to configure the adaptor.
I have never used this type of ethernet adaptor so my knowledge about this device is weak.
Any help would be appreciated. If you need more info let me know.
Adaptor IP - 192.168.1.46
PanelView IP - 192.168.1.47
I can go online with the processor and program the PanelView with my PC via ethernet switch, but I cannot get the PanelView to communicate with the processor.
I have the RSView application shortcut set to the adaptor IP.
I am using the ENI Utility software to configure the adaptor.
I have never used this type of ethernet adaptor so my knowledge about this device is weak.
Any help would be appreciated. If you need more info let me know.
Last edited: