[email protected]
Member
Please assist, i don't know where to start. Vending machine for personal use only for a school project. I've attached a picture of what it should look like. This vending machine like unit will have only two motors that controls the direction of the plate that holds a soda can fetching container.
One of the motors moves the plate in a circular/horizantal/clockwize motion. Its purpose is to place the can fetching container directly under the vertical cylinder that stores the can beverages.
The second motor will elevate up this can fetching container in a vertical motion in order to physically selected. Then it will go down half way.
The 1st motor will then located in a horizontal clockwize motion to the consumers window. Once obtained, it will take it home in a clockwize motion and finally bring it down home with the 2nd motor to its home origin.
I will need a circuit diagram, an idea of what components to buy and a plc program.
One of the motors moves the plate in a circular/horizantal/clockwize motion. Its purpose is to place the can fetching container directly under the vertical cylinder that stores the can beverages.
The second motor will elevate up this can fetching container in a vertical motion in order to physically selected. Then it will go down half way.
The 1st motor will then located in a horizontal clockwize motion to the consumers window. Once obtained, it will take it home in a clockwize motion and finally bring it down home with the 2nd motor to its home origin.
I will need a circuit diagram, an idea of what components to buy and a plc program.