Phoenix Contact Interbus RFC 430 2730190
- Thread starter abdullah333
- Start date
gartut
Member
This is a Firmware Error, You will need to send it back to Phoenix to reload the firmware on. Unfortunately there is no way to do this yourself.
Contact your local Phoenix Supplier
Contact your local Phoenix Supplier
Similar Topics
Hi, I'm working with a Phoenix Contact FL NAT 2304-2GC-2SFP Ethernet switch, I already set the IP address and it has been working fine. I can...
Hi all,
Historically i have used AB compactlogix exclusively working within the Logix/Studio5000 environment. I have decided to step out of my...
Hi all, first time poster and working on an existing PC TriSafe PLC for the first time for a project.
I am wondering if anyone would know if...
(Rant)(CAD Models): Phoenix Contact Took the Time to say "FU!!" to their customers
So obviously they have real CAD models of their parts because...
Hello everyone,
We are trying out the Phoenix Contact HMI TP something or other.
Anyway, it uses the free Visu+ software.
Does anyone have much...