Hi friends,
Today I started to work with PIDE block in studio 5000. Im using controllogix PLC AB.
1. I have connected the analoginput (physical) to Process variable of PIDE blk.
2. I have connected the analogoutput (physical) to CVEU.
3. Then I gave set point to SP= 5.
4. When i turn my input, it is displaying but there is no change in output. It shows only 0.0 i.e. CVEU=0.0..
5. Further I couldnt get into auto mode.
What may be the problem??
Today I started to work with PIDE block in studio 5000. Im using controllogix PLC AB.
1. I have connected the analoginput (physical) to Process variable of PIDE blk.
2. I have connected the analogoutput (physical) to CVEU.
3. Then I gave set point to SP= 5.
4. When i turn my input, it is displaying but there is no change in output. It shows only 0.0 i.e. CVEU=0.0..
5. Further I couldnt get into auto mode.
What may be the problem??