Shambo Member S Join Date Dec 2022 Location Illinois Posts 1 Jan 5, 2023 #1 im tring to find out if i have a bad power supply for my panelview 1000 plus. does anyone have the pinout for the 10 pin connector on the powersuply? included a pice of the power suply and back of the housing for part number referance.
im tring to find out if i have a bad power supply for my panelview 1000 plus. does anyone have the pinout for the 10 pin connector on the powersuply? included a pice of the power suply and back of the housing for part number referance.
5618 Lifetime Supporting Member + Moderator Join Date Oct 2017 Location York, PA Posts 390 Jan 5, 2023 #2 I fired up a 2711-RP2 power supply with the processor board unplugged. Voltages I see: Clip side: red +5V, red 0V, black 0V, orange 0V, yellow 0V. Non clip side: red +5V, black +5V, black 0V, black +24V, brown +1.4V.
I fired up a 2711-RP2 power supply with the processor board unplugged. Voltages I see: Clip side: red +5V, red 0V, black 0V, orange 0V, yellow 0V. Non clip side: red +5V, black +5V, black 0V, black +24V, brown +1.4V.