1knarf
Member
Using a 1762-IQ32T DC Input Card Ser A with a prewired 1492-CAB010U62 cable and I can't find pinout data anywhere. I think it came with the cable but it was misplaced. Does anyone know where I could find one.
Pinout on 1492-CAB010U62 cable
- Thread starter 1knarf
- Start date
Similar Topics
Is the connection between 1492 and 1762-IQ32T same as the connection between 1492 and 1746-IB32?
As they are from the same manufacturer
Hello,
Does anyone have one of these cables and willing to open the case so I can see the cable connections inside?
2707-NC5
I have sourced the...
Hello guys,
I am trying to control a ATV12 via Modbus Poll software. I need the connection diagram for Altivar Modbus RJ45 port to DB9 port.
Thank you
Hello All
I have a modbus tcp device(Julabo magio) with an DB9 pin assignment. Pin3=B and Pin8=A. I would like to connect it on the secondary...
im tring to find out if i have a bad power supply for my panelview 1000 plus. does anyone have the pinout for the 10 pin connector on the...
