504bloke
Lifetime Supporting Member
Ok
Just playing with devicenet rsnetworks and setting up a 1747-sdn scanner for mapping a 590+ SSD DC Drive
I will be using in this example
0x71 read 12 bytes as per ssd manual
0x66 write 10 bytes as per ssd manual
see attached for ssd manual page
One Question
On the edit IO Parameters in rsnetworks
which way do i read the Input and Output mapping
i have attached a photo, is this correct
ie
input size - 12 which corresponds to a read on the 590+ of 12 words ? or have i got this the wrong way round! ??! ?
Thanks in advance
Just playing with devicenet rsnetworks and setting up a 1747-sdn scanner for mapping a 590+ SSD DC Drive
I will be using in this example
0x71 read 12 bytes as per ssd manual
0x66 write 10 bytes as per ssd manual
see attached for ssd manual page
One Question
On the edit IO Parameters in rsnetworks
which way do i read the Input and Output mapping
i have attached a photo, is this correct
ie
input size - 12 which corresponds to a read on the 590+ of 12 words ? or have i got this the wrong way round! ??! ?
Thanks in advance