PLC 5/20 and 5/40

[jcp]

Hi fellows;
Hope all are well. I have a control of gas turbine which used the AB 5/20 and 5/40. The communicaton esstablished with AB6200 dos version. I search all over the net but i am fail to dowbload this for learning purpose. Some body suggest me that you can alos used RSLOGIX 5 for that. But still again fail to download the demo version.
I just want to download that for learning purpose is their any link where i download it or any sugession which software i used for learning that PLC's. I have already work on RSLOGIX 5000 version 13 and 16.
Please guide me i will appriciate.
Thanking you

 

[sthompson]

Hi fellows;
Hope all are well. I have a control of gas turbine which used the AB 5/20 and 5/40. The communicaton esstablished with AB6200 dos version. I search all over the net but i am fail to dowbload this for learning purpose. Some body suggest me that you can alos used RSLOGIX 5 for that. But still again fail to download the demo version.
I just want to download that for learning purpose is their any link where i download it or any sugession which software i used for learning that PLC's. I have already work on RSLOGIX 5000 version 13 and 16.
Please guide me i will appriciate.
Thanking you

I may be corrected, but I don't think AB/Rockwell had Demo Software for the RSLogix line. The 6200 Software is very old and deprecated. So, you should look at upgrading to RSLogix5.

There are some free versions of RSLogix for the Pico and Micro lines that are similar, but do not program the PLC5. It would give you a feel for the RSLogix User Interface.

Stu....

 

[jcp]

Dear sir;
Can i open my project in that for learnning purpose.
regards
bye

 

[sthompson]

Dear sir;
Can i open my project in that for learnning purpose.
regards
bye

You will need RSLogix5 to open your existing 6200 Project. I would contact your local AB Supplier to see what they can do for you.

Stu.....