I followed the instruction @ this site:
http://plcview.blogspot.com/2012/02/...hernet-to.html
If I were to write to the "technote_data" array in the controllogix PLC, would that data show up in the PLC-5 or is the instruction only for data flowing from PLC-5 to the controllogix
http://plcview.blogspot.com/2012/02/...hernet-to.html
If I were to write to the "technote_data" array in the controllogix PLC, would that data show up in the PLC-5 or is the instruction only for data flowing from PLC-5 to the controllogix