PLC and Iridium satellites

diat150

Lifetime Supporting Member
Join Date
Mar 2006
Location
Louisiana
Posts
1,476
has anyone used any type of PLC to generate the required AT commands to send a "short burst data" message thru an Iridium satellite modem? This would be used in remote locations where there are no other options for communications. Probably a longshot but just wanted to put out some feelers while I look into using this method.
 
I ran into the same problem, so my company developed a small iridium Modbus transceiver so we could bring in remote rtu's. We can use either serial or tcp. Works great within specifications.
 

Similar Topics

Does anyone know whether a Micro800 series PLC is COS or typical scan solve set housekeep (SSSH)
Replies
0
Views
26
Hi there , when I trying to do some communication things with PLC , I think I made a mistake and now PLC has fatal error. Only error light turn on...
Replies
0
Views
28
Hello, fellow PLC enthusiasts, I’m a newbie in PLC and am currently on a project that involves connecting an Omron CP1E (CP1W-CIF11) PLC to an...
Replies
2
Views
74
Hello, I want to connect the Factorytalkview ME with rslogix500 to see the live response of HMI buttons in Rslogix500 ladder code . I am using PLC...
Replies
6
Views
117
I have a cell with a compact guardlogix as the plc and I have three hmi's and two vfd's on this cell. I been experiencing momentary comms faults...
Replies
10
Views
156
Back
Top Bottom