plc-beckhoff-cx5010-cx8090-ADS communicatie

cuinhel

Member
C
Join Date
Jan 2013
Location
opglabbeek
Posts
2
Hello,

I have a problem with ADS communication. We have a fuction block for reading an array off parameters. Now our question is how we put our parameters in an array in 1 PLC and read it with the other PLC over ethernet.

Thanks for your time!
 

Similar Topics

L
Beckhoff PLC and EDS
Hi, I'm trying to import a Rockwell/AB EDS to Beckhoff but I'm not sure how to import/install the EDS. It is a PowerFlex 525 EDS. Is there a way...
Replies
1
Views
137
busarider29
busarider29
L
Beckhoff IPC and Controllogix PLC
I'm trying to integrate a Beckhoff IPC with a Controllogix PLC. There is some documentation, on the Beckhoff website, on how to do a PLC-PLC comms...
Replies
0
Views
186
lcabal27
L
J
Linear potentiometer on Beckhoff PLC
Hello, We are currently working on a project that involves connecting a linear potentiometer to our Beckhoff PLC. After researching, we...
Replies
2
Views
231
Jasper_
J
G
Beckhoff Embedded PLC
Morning all, we have a CP2715-0010 1.46GHz Atom running Windows 10 Enterprise (Embedded PLC with the HMI). Problem being is the performance is...
Replies
1
Views
684
Zensequitur
Zensequitur
R
Beckhoff PLC as an EtherCAT Bus
At my current job we have a relatively new system that has an Allen Bradley PLC as the main controller with some local I/O, but a lot of remote...
Replies
12
Views
2,748
RedSoxFan3
R
Back
Top Bottom