PLC Contractors NW England

Andrew Hardy

Member
A
Join Date
May 2010
Location
Stockport
Posts
87
I've been contracting since 2010 and have occasionally found that I'm needed in 2 places at the same time (as is about to happen on Monday 13th July) so I thought I'd harness the power of the internet to contact other self employed PLC engineers in my area (I'm based in Stockport, in the NW of England) mainly so I might be able to pass on or pick up the odd day's work here and there.

If you're interested please get in touch via this thread or PM phone

Cheers

Andy
 

Similar Topics

H
Mitsubishi FX3G PLC with Beijer HMI E615
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
3
Views
52
parky
P
L
Beckhoff PLC and EDS
Hi, I'm trying to import a Rockwell/AB EDS to Beckhoff but I'm not sure how to import/install the EDS. It is a PowerFlex 525 EDS. Is there a way...
Replies
1
Views
74
busarider29
busarider29
R
Issue with mitsubushi melsec PLC modbus QJ71MT91
I want to communicate my Q series PLC with Factory IO using GX works 2 software, I want to use modbus as server and the ips are as follows plc...
Replies
0
Views
49
raheelredben
R
C
0-20mV Loadcell with 2080-TC card Micro850 PLC
Hi everyone. I'm trying to read values from a Loadcell with a 2080-TC card. I know the 2080-TC is a thermocouple card but it reads millivolts that...
Replies
4
Views
86
chikhim
C
P
Looking for a personal PLC tutor, should I post in the PLC job ad section
Hello All, Please direct me to post to the right page. I am really new to PLC, and want to find a tutor who is familiar with Automation Direct's...
Replies
6
Views
248
jaden
J
Back
Top Bottom