plc...,i know! pmc...,let me know please...

[REZAR]

my job is making a cnc running well after jig modification finish.
this jig had 3 confirm, 1.clamp 2.unclamp 3.part detect. this confirmation trough balluff remote sensor.
i had a toyopuc software(allwin). but this cnc is using another device.
my question :
1. is toyopuc pmc?
2. what is big difference between? (plc-pmc)
3. how to get and or find this cnc "device(plc/pmc)" software, connector, or another important point?


please, if there is unclear or mistakes statements, let me know..

reza,

 

[Unregistered G U E S T]

reza

Not familiar with pmc by that nomenclature. Does it have another name or identifier, or what does PMC stand for?

 

[Steve Bailey]

In the context of Fanuc CNC controllers, PMC stands for Programmable Machine Controlller, and means the ladder logic task running on the CNC controller. I don't know whether other manufacturers use the same terminology. Check out this thread.
http://www.plctalk.net/qanda/showthread.php?s=&threadid=9741