PLC M2NCPU regarding

Nageshks19

Member
N
Join Date
Sep 2013
Location
*******
Posts
1
We have a PLC with Model No. M2NCPU - S1 and on cpu card as M3NMCA-4, with a set of MX11 & MY13 and MY10 I/O Cards.
I would like to know which is the software used for this and the communication cable details.
Also since it is outdated, which is the equivalent CPU for this unit.
 

Similar Topics

L
Beckhoff PLC and EDS
Hi, I'm trying to import a Rockwell/AB EDS to Beckhoff but I'm not sure how to import/install the EDS. It is a PowerFlex 525 EDS. Is there a way...
Replies
1
Views
48
busarider29
busarider29
R
Issue with mitsubushi melsec PLC modbus QJ71MT91
I want to communicate my Q series PLC with Factory IO using GX works 2 software, I want to use modbus as server and the ips are as follows plc...
Replies
0
Views
39
raheelredben
R
C
0-20mV Loadcell with 2080-TC card Micro850 PLC
Hi everyone. I'm trying to read values from a Loadcell with a 2080-TC card. I know the 2080-TC is a thermocouple card but it reads millivolts that...
Replies
4
Views
80
chikhim
C
P
Looking for a personal PLC tutor, should I post in the PLC job ad section
Hello All, Please direct me to post to the right page. I am really new to PLC, and want to find a tutor who is familiar with Automation Direct's...
Replies
5
Views
180
geniusintraining
geniusintraining
M
Omron plc backwards compatibility
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Replies
1
Views
55
IO_Rack
IO_Rack
Back
Top Bottom