nanomon
Member
Hi,
I have a Remote 1734-AENT point io communication adapter connected to compact logix 1769-L32 processor through TCP IP Ethernet. Whenever there is a power failure or the module is restarted, the AENT Module's "Module Status & Network Status" indications are blinking Red-Green until I unplug the communication cable and insert back.
Is the module Faulty? or anything in the communication causing it. any Advises.
I have a Remote 1734-AENT point io communication adapter connected to compact logix 1769-L32 processor through TCP IP Ethernet. Whenever there is a power failure or the module is restarted, the AENT Module's "Module Status & Network Status" indications are blinking Red-Green until I unplug the communication cable and insert back.
Is the module Faulty? or anything in the communication causing it. any Advises.