Hi.
I am, in fact, not an specialist in PLC's but, in my work we remotely access a gear 500 kilometers away and we have observed, after some electrical energy glitches, power outages, one of the components of our system, a Schneider Electric PLC Zelio Logic SR3, lost its connection through the ethernet, so far being the only solution to ask someone else around to unplug and then replug the ethernet connector.
The ethernet connection is provided by a Cisco Catalyst 3500 and, as far as other components easily/promptly recover after a power outage, it seems to be our only problem is the PLC.
I will appreciate if someone -please- can give me a suggestion. Whoever programmed the PLC is not here, that is why I am searching for possible answers.
Thank you very much in advance.
I am, in fact, not an specialist in PLC's but, in my work we remotely access a gear 500 kilometers away and we have observed, after some electrical energy glitches, power outages, one of the components of our system, a Schneider Electric PLC Zelio Logic SR3, lost its connection through the ethernet, so far being the only solution to ask someone else around to unplug and then replug the ethernet connector.
The ethernet connection is provided by a Cisco Catalyst 3500 and, as far as other components easily/promptly recover after a power outage, it seems to be our only problem is the PLC.
I will appreciate if someone -please- can give me a suggestion. Whoever programmed the PLC is not here, that is why I am searching for possible answers.
Thank you very much in advance.