plc uplaoding program

enghmk

Member
E
Join Date
Apr 2009
Location
Alex
Posts
3
dear mr.eng

in fact while the uploading for the plc program from S7 315-DP, there was two errors message As follwing:

error 120 then error 2000 and i hope that you explain for me the meaning or description of this errors

AS the uploaded program with out any DP slaves only the master
 

Similar Topics

C
0-20mV Loadcell with 2080-TC card Micro850 PLC
Hi everyone. I'm trying to read values from a Loadcell with a 2080-TC card. I know the 2080-TC is a thermocouple card but it reads millivolts that...
Replies
4
Views
57
chikhim
C
P
Looking for a personal PLC tutor, should I post in the PLC job ad section
Hello All, Please direct me to post to the right page. I am really new to PLC, and want to find a tutor who is familiar with Automation Direct's...
Replies
2
Views
55
PLCnoobTW
P
M
Omron plc backwards compatibility
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Replies
1
Views
45
IO_Rack
IO_Rack
T
Anyone here work for Johnson Controls now or in the past?...need help with OLD PLC program
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
Replies
0
Views
86
TheCaptain2000
T
P
SOFTWARE TIA PORTAL V14 - PLC SIEMENS
Hello, good morning, I have been having two problems with the Tia Portal software. The first is that I have installed it on my computer and...
Replies
3
Views
82
AlfredoQuintero
A
Back
Top Bottom