POD connection with NB Series PLC

PoMpAsTiC

Member
P
Join Date
Nov 2007
Location
tripoli
Posts
1
HELLO Every body
I wish all in great and good time.
I am Working with friend to upgrade the plastic injection machine from the old system ,(italian made 1983).

I have a problem To connect POD UG430H-SS with PLC from fuji electronic NB SERIES PLC with 56 I/O ,can i make a connection between them or change my PLC to anothere one like SPB OR MICREX .
Is there any documents or files that will be help us ?
Thanks ,with my regards.
PoMpAsTiC
 

Similar Topics

J
Fuji POD communications
I need to change the communications parameters on a Fuji UG30 OI. Is there a way to do this from the panel or is there software somewhere that...
Replies
0
Views
1,425
jeikenny
J
L
Fuji POD HMI Screen transfer cable
Hi, Does anyone have a pinout for the above? The part number is UG00C-T? Thanks in advance
Replies
0
Views
5,294
lc03
L
G
Fuji pod - serial communication
Sir, Im working with a Fuji POD ug400.I need to know details on how to make my POD(Slave) communicate directly with my computer(Master).Im using...
Replies
3
Views
8,145
dianooshy
D
S
Rockwell PLC Looses Connection Evrytime I reboot..
I have got an Rockwell PLC 1769-L36ERMS . I have assigned a IP address to it . But every-time I Reboot the PLC it looses Communication to my PC...
Replies
1
Views
82
Ken Roach
Ken Roach
S
TIA-portal - Adding connection to HMI in a different project
Hello all! So I have one project with a S7-1214 and a MTP1500 "Project1" and one project with another S7-1214 "Project2". Both of these PLC:s need...
Replies
6
Views
112
swedeleaner
S
Back
Top Bottom