Power flex525 with micrologix 1400
- Thread starter Anilaark
- Start date
Similar Topics
We are using Allen Bradly DI module 1756-IB32/B in one of my projects. I'm facing an issue (I'm getting 25 VDC from some of the inputs channels)...
We have a panel view 1000 powered by 230VAC protected by a 16A type 2 MCB.
After initial power up of the MCC, the MCB trips and needs to be...
Good morning, I'm searching for a power supply to convert 3 phase 480VAC to 120VAC and 24vdc. Is there an all-in-one power supply like this on the...
Hi,
i am using DVP-14SS2 PLC, after program written to plc, when power is reset, plc doesn't run. always need to connect to pc for the run mode.
Hello all,
I am currently trying to program a PowerFlex 525, version 7.0. We had a power outage recently and when the power was restored, the...