janner_10 Lifetime Supporting Member J Join Date Dec 2014 Location Tewkesbury Posts 1,301 Nov 27, 2017 #16 In your example, you aren't giving it the start CMD - it wont be moving anywhere without that!
SebasMora Member S Join Date Apr 2017 Location Orlando, FL Posts 2 Nov 30, 2017 #17 Solved this issue. There is a parameter to enable Reverse direction that I was not aware of. This code works as shown as long as my Drive:O.Start is true. Direction is selected by toggling Debug_Bits_SM.31.
Solved this issue. There is a parameter to enable Reverse direction that I was not aware of. This code works as shown as long as my Drive:O.Start is true. Direction is selected by toggling Debug_Bits_SM.31.
duskogavrovski Member D Join Date Aug 2009 Location Windsor Posts 3 Mar 22, 2019 #18 PowerFlex 525 - what will happen if I connect DB resistor to DC+ and DC- instead to BR+ and BR- ?
RonJohn Lifetime Supporting Member Join Date Jul 2013 Location NE Ohio Posts 535 Mar 22, 2019 #19 Welcome to the forum, duskogavrovski! Since this thread is two years old and your question isn't directly related to the OP, I'd suggest you start a new topic to get better results.
Welcome to the forum, duskogavrovski! Since this thread is two years old and your question isn't directly related to the OP, I'd suggest you start a new topic to get better results.
rupej Member R Join Date Sep 2014 Location NC Posts 967 Mar 23, 2019 #20 duskogavrovski said: PowerFlex 525 - what will happen if I connect DB resistor to DC+ and DC- instead to BR+ and BR- ? Click to expand... It would become very warm, very quickly.
duskogavrovski said: PowerFlex 525 - what will happen if I connect DB resistor to DC+ and DC- instead to BR+ and BR- ? Click to expand... It would become very warm, very quickly.