Hi;
To assign an IP to a device, I have installed BOOTP/DHCP server (by Rockwell). By following the instructions, I send IP to a connected device upon its MAC. When I click “Disable BOOTP/DHCP”, after some time, every time message appears “Failed to complete the requested operation……………” and in status bar, “Socket connect failed………..”. All the connections are ok that’s why the MAC address of device appears in BOOTP. I do also set the same series IP and Subnet Mask of Laptop (say 172.16.28.250 and 255.255.255.0) as that which I want to set to device (say 172.16.28.255 and 255.255.255.0). Don’t know why I am facing the problem. Kindly help me out.
To assign an IP to a device, I have installed BOOTP/DHCP server (by Rockwell). By following the instructions, I send IP to a connected device upon its MAC. When I click “Disable BOOTP/DHCP”, after some time, every time message appears “Failed to complete the requested operation……………” and in status bar, “Socket connect failed………..”. All the connections are ok that’s why the MAC address of device appears in BOOTP. I do also set the same series IP and Subnet Mask of Laptop (say 172.16.28.250 and 255.255.255.0) as that which I want to set to device (say 172.16.28.255 and 255.255.255.0). Don’t know why I am facing the problem. Kindly help me out.