RDay
Member
Has anyone else had this problem with DS32? I am currently experiencing this problem with a program on a DL05 but I have had this happen to me several times with a 06 as well.
With a program loaded and running in the PLC. If I select a coil, say C100, then press the "Value" button. I get the "Change Value" box but it is not complete. The "Write To" and "Read From" PLC buttons are faded out, the "Current" and "New" value boxes are over lapping, and I can't update the value. When I select other coils they may be just fine.
The coil is not mapped to any physical I/O and there is nothing that I see that could be affecting it.
I have tried clearing the PLC memory, cycling the power, and reloading the program.
I have reinstalled DirectSoft. I have also tried installing it on a different PC just incase. I am running DirectSoft32 version 4, build 22.
I have updated the PLC firmware to the latest release.
Any ideas?
Help?
Please!
With a program loaded and running in the PLC. If I select a coil, say C100, then press the "Value" button. I get the "Change Value" box but it is not complete. The "Write To" and "Read From" PLC buttons are faded out, the "Current" and "New" value boxes are over lapping, and I can't update the value. When I select other coils they may be just fine.
The coil is not mapped to any physical I/O and there is nothing that I see that could be affecting it.
I have tried clearing the PLC memory, cycling the power, and reloading the program.
I have reinstalled DirectSoft. I have also tried installing it on a different PC just incase. I am running DirectSoft32 version 4, build 22.
I have updated the PLC firmware to the latest release.
Any ideas?
Help?
Please!