Hi,
I have a proface model GP2301SC41 using which i need to communicate with a PLC i have...it is a Danaher motion PLC. I have a CAN bus running into it from the PLC. I am nit sure if the CAN bus is working or not. Can someone help me with this...i need to know how this proface model communicates with the PLC usinf this can bus....Also there are some bit switches on the side of the proface..i think it is significant as far as the CAN is concerend. PLease post ur replies ASAP. Thanks for ur help..\
Harry
I have a proface model GP2301SC41 using which i need to communicate with a PLC i have...it is a Danaher motion PLC. I have a CAN bus running into it from the PLC. I am nit sure if the CAN bus is working or not. Can someone help me with this...i need to know how this proface model communicates with the PLC usinf this can bus....Also there are some bit switches on the side of the proface..i think it is significant as far as the CAN is concerend. PLease post ur replies ASAP. Thanks for ur help..\
Harry