Program ALTIVAR 71 with rslogix5000

SoftBrian

Member
S
Join Date
Jul 2018
Location
coronel
Posts
1
Hello everyone, we want to control an engine with the altivar 71 drive, we have the configuration ready and the program generates some tags but we do not know how to program it

we configure it through rsnetworkdevicenet
and we use the rslogix5000 l32e

If someone could help us we would be grateful
 
what communication protocol is being used? device net? Didnt even know that ATV71 could communicate on that protocol
 

Similar Topics

E
Accessing Altivar builten alarm group in S7 Program using GSD
Hi all, I am trying to access the builten alarm group of Scneider Altivar drive using GSD in S7. Although i have a FB, provided by the vender...
Replies
0
Views
1,987
engrjawwad05
E
T
Anyone here work for Johnson Controls now or in the past?...need help with OLD PLC program
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
Replies
0
Views
104
TheCaptain2000
T
A
Trying to get copy of Red Lion G315 HMI program but support upload was not ticked.
Hi All, As a precaution my company has been collecting copies all the HMI and PLC programs. I have recorded copies of most of our sites...
Replies
0
Views
73
Angus_Fergusson
A
A
Migrating Program from S7-300 to RSLogix500 & Migration from CompactLogix to RSLogix500
So basically i have 2 queries : 1. I have a program file of S7-300 PLC which i want to migrate in RSLogix500.In short i want to convert my simatic...
2
Replies
15
Views
269
geniusintraining
geniusintraining
N
DVP-14SS2 program does not Run after Power Reset
Hi, i am using DVP-14SS2 PLC, after program written to plc, when power is reset, plc doesn't run. always need to connect to pc for the run mode.
Replies
0
Views
39
nadeem2nazar
N
Back
Top Bottom