Hey everyone,
Just received a call from a site where we have a SLC 5/05 connected to a PV+1000 over ethernet via a switch. THey had a power outage over the weekend, and when coming abck online they do not have anything displaying on the screen, it is completely black.
Typically, the screen saver will kick in and the AB logo will move around, but in this case nothing is coming up. The screen is completely black. The power, etc. was checked on the unit and everything seems to be OK in that sense. On the back of the unit, the COMM light is SOLID GREEN, and the FAULT light is BLIKING RED (slow blink).
Has anyone had this happen at all? From the AB Manual, it says with the LED light configuration as above, there is a problem with the OS/Firmware. However, I am not sure if this is something that is common with these units. Maybe the whole unit is pooched. Any ideas?
I have to head up to site in the next week or so, and any help would be appreciated. I plan on checking all the wiring again, and maybe resetting the unit and seeing if anything does come up.
Thanks!
Just received a call from a site where we have a SLC 5/05 connected to a PV+1000 over ethernet via a switch. THey had a power outage over the weekend, and when coming abck online they do not have anything displaying on the screen, it is completely black.
Typically, the screen saver will kick in and the AB logo will move around, but in this case nothing is coming up. The screen is completely black. The power, etc. was checked on the unit and everything seems to be OK in that sense. On the back of the unit, the COMM light is SOLID GREEN, and the FAULT light is BLIKING RED (slow blink).
Has anyone had this happen at all? From the AB Manual, it says with the LED light configuration as above, there is a problem with the OS/Firmware. However, I am not sure if this is something that is common with these units. Maybe the whole unit is pooched. Any ideas?
I have to head up to site in the next week or so, and any help would be appreciated. I plan on checking all the wiring again, and maybe resetting the unit and seeing if anything does come up.
Thanks!