I have a PV+ 7 std 1200W that will not connect to my PLC and I get a diagnostic error in the HMI,
"factorytalk diagnostics failed to load the message: the providers resource file could not be found"
I'm using factorytalk ME v10, I updated the HMI to v10. The panelview goes though a stratix8000 to a 1756-EN2T and my controller is a 1756-L81E.
CPU (1756-L81E): 192.168.100.105
EN2T: 192.168.38.10
Stratix: 192.168.38.20
PV: 192.168.38.30
I've never encountered this issue before, could be be a firmware issue?
Thanks for any help.
EDIT: added picture of error
View attachment 20190320_171306.jpg
"factorytalk diagnostics failed to load the message: the providers resource file could not be found"
I'm using factorytalk ME v10, I updated the HMI to v10. The panelview goes though a stratix8000 to a 1756-EN2T and my controller is a 1756-L81E.
CPU (1756-L81E): 192.168.100.105
EN2T: 192.168.38.10
Stratix: 192.168.38.20
PV: 192.168.38.30
I've never encountered this issue before, could be be a firmware issue?
Thanks for any help.
EDIT: added picture of error
View attachment 20190320_171306.jpg
Last edited: