Hello
I need to program a that pv but RSlynx and my FTview 8 don't recognize tit.
My RSlynx entreprise seem to be looking for a revision 7
Rslink classic see a revision 8.xxx on the device and mark it with a ''?''
When i check with my part # to get a new EDS, i just found revision9 files...(Rockwell website)
I tried to add the rev9 to rs classic using the add eds tool but no success...i think it look for rev8 like the hmi?
So first, how connected are RSlynx classic and Entreprise? Do both need to get the correct file ? I have the tool to add EDS to the Classic version but i don't know how to add it to Entreprise?
Then i'm i on the right track to search for a REV8 ? Or i would need to upgrade hmi firmware to find i need to update my FT talk soft to rev9 too?
Any tip or help is welcome
I need to program a that pv but RSlynx and my FTview 8 don't recognize tit.
My RSlynx entreprise seem to be looking for a revision 7
Rslink classic see a revision 8.xxx on the device and mark it with a ''?''
When i check with my part # to get a new EDS, i just found revision9 files...(Rockwell website)
I tried to add the rev9 to rs classic using the add eds tool but no success...i think it look for rev8 like the hmi?
So first, how connected are RSlynx classic and Entreprise? Do both need to get the correct file ? I have the tool to add EDS to the Classic version but i don't know how to add it to Entreprise?
Then i'm i on the right track to search for a REV8 ? Or i would need to upgrade hmi firmware to find i need to update my FT talk soft to rev9 too?
Any tip or help is welcome