question

Ram@1392

Member
R
Join Date
Jan 2016
Location
andheri
Posts
1
dear frnd,

can any please help me in PLC communication. I'm using Delta 14 SS2 with delta HMI TP 02 & i want to communicate PLC with that HMI using RS 485 communication port given on PLC. plz reply me as early as possible
 
You have told us what you want to do. However, you haven't asked a question. The forum is not equipped to design a system for you. If you ask a specific question you will get a specific answer.

Keith
 

Similar Topics

O
AB 1769- L30 Input Card Question
I have a 120V relay, 120V DI card and a analog input. I was wanting to know if i could put a 24V DI and well as a 120V DI card on the same plc...
Replies
1
Views
76
joseph_e2
J
S
simple logic question
Hello again..trying something on an existing poorly written program and just wanted to double check something system is an A-B MicroLogix 1200 In...
Replies
5
Views
192
robertmee
R
F
FactoryTalk HMI Question (Recipes)
Good morning! Let me start by saying, I am still learning about this type of HMI programming. I recently watched a video about recipes and how it...
Replies
4
Views
177
PiNkYnotBrain
P
J
CL 5380 RTC vs Timer.ACC, question
I have some logic that I have written within a 5380 series controller that tracks the time an event is started, while the event is running an RTO...
Replies
2
Views
105
JZerb
J
P
Hello! I have a question about HMI 2711R
I have an HMI 2711R - T4T Series B, and I want to know which PLCs, besides Micro 820, can communicate with it.
Replies
2
Views
113
plc_siamens
P
Back
Top Bottom