Question

Gary_R

Member
G
Join Date
Jul 2009
Location
Michigan
Posts
2
Anyone have experiance communicating with an ABB 800 series drive using a RPBA-01 profibus adapter module with a PIC 900 scanner module? Any example or advice would be greatly appreciated.

Thanks
 

Similar Topics

O
AB 1769- L30 Input Card Question
I have a 120V relay, 120V DI card and a analog input. I was wanting to know if i could put a 24V DI and well as a 120V DI card on the same plc...
Replies
1
Views
89
joseph_e2
J
S
simple logic question
Hello again..trying something on an existing poorly written program and just wanted to double check something system is an A-B MicroLogix 1200 In...
Replies
5
Views
197
robertmee
R
F
FactoryTalk HMI Question (Recipes)
Good morning! Let me start by saying, I am still learning about this type of HMI programming. I recently watched a video about recipes and how it...
Replies
4
Views
195
PiNkYnotBrain
P
J
CL 5380 RTC vs Timer.ACC, question
I have some logic that I have written within a 5380 series controller that tracks the time an event is started, while the event is running an RTO...
Replies
2
Views
108
JZerb
J
P
Hello! I have a question about HMI 2711R
I have an HMI 2711R - T4T Series B, and I want to know which PLCs, besides Micro 820, can communicate with it.
Replies
2
Views
115
plc_siamens
P
Back
Top Bottom