Johnnyinscoe
Member
I am having issues loading an older Quickpanel Model QPICTDE0000 with the .prj file that was supplied. Every time I try to import the file into quick designer I am getting an error "i". Can anyone please help me with this. I also have went and purchased a CF card and reader. Made a fake program with the correct panel model selected and loaded it to the CF Card. So the files are there for storing the program, but the offline screens are in Japanese.
The old screen starts up and then the LED goes from green to orange on the front and once that happens touching buttons on the screen does not change anything in the PLC. I can change the tag value in the PLC program(RS500)and the screen will change, but no inputs from touchscreen go back into the PLC.
Actually, when first booting up, the screen LED turns green for a second and a half. During that short time any button pressed will actually go thru to the PLC. I can turn system on and then screen locks up. Go offline and then go back online and LED goes green again and for 1-1/2 seconds it will work and do what it is suppose too until that light goes to orange again.
I have purchased a programming cable and a quickpanel QPICTDE0000 and have the prj file. can anyone help.
I need the .prj file to be changed to a .cmp or if someone will tell me what to do to move the program from one Quickpanel to another I really would appreciate it.
Thanks so much for any assistance!!!
The old screen starts up and then the LED goes from green to orange on the front and once that happens touching buttons on the screen does not change anything in the PLC. I can change the tag value in the PLC program(RS500)and the screen will change, but no inputs from touchscreen go back into the PLC.
Actually, when first booting up, the screen LED turns green for a second and a half. During that short time any button pressed will actually go thru to the PLC. I can turn system on and then screen locks up. Go offline and then go back online and LED goes green again and for 1-1/2 seconds it will work and do what it is suppose too until that light goes to orange again.
I have purchased a programming cable and a quickpanel QPICTDE0000 and have the prj file. can anyone help.
I need the .prj file to be changed to a .cmp or if someone will tell me what to do to move the program from one Quickpanel to another I really would appreciate it.
Thanks so much for any assistance!!!