read some different tags

a7med918

Member
A
Join Date
Dec 2007
Location
cairo
Posts
46
Dear all
i have many CPUs Siemens and Mitsubishi with WINCC and FIX HMI

all computers have internet and i want to connect all this computer with one new screen have important tags i want to take some tags from each CPU using internet to run only one HMI read only screen to view some parameters like speed, pressure and voltage
Awaiting your help
 

Similar Topics

R
How to read/write changes to an existing AB FTView SE program
Hello, I am fairly experienced programming and modifying existing FTView ME programs. I have also used FTView SE to make modifications to a...
Replies
5
Views
137
Operaghost
Operaghost
L
Read pulses from a magnetic-inductive flow meter and modify pulses by a user inputted valve and to output the modified rate to another pulse reader
Hi, The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001. I will set the flow meter...
Replies
4
Views
217
Steve Bailey
Steve Bailey
A
Logix 5000 FAL Read Every Other Member
Is there a way to use the FAL instruction to do +=2 instead of +=1? I have an array that is organized with alternating "data" and "flag" values...
Replies
5
Views
157
AMarks95
A
C
ControlLogix read force status in plc program
Hi everyone i have a customer, who wants to show an alarm on the machine, if the I/O forces are enabled and set, on at ControlLogix L81E with...
Replies
3
Views
299
crawler009
C
L
Read real data from hmi to plc
Hi Iam using monitouch hmi(V9 soft) with omron plc cj2m (CX programmer). In this I want to read a data from hmi to plc. The data was like...
Replies
0
Views
126
Lee sung
L
Back
Top Bottom