boiler-todd
Member
I am using a panelview 600C with ethernet to a SLC 505. We have had this machine for about 8 months. A problem has come up now that the panelview will not work as I keep getting two errors.
-- 634 Write Timeout for bit B3:1/8 and
634 Read Timeout for bit B10:0
AB error code states Check/Define data table address in controller.
When I look at the node address for the button and alarm, the addresses are matching the node cofiguration.
Does anyone have any suggestions on what else to try?
Thanks,
Todd.
-- 634 Write Timeout for bit B3:1/8 and
634 Read Timeout for bit B10:0
AB error code states Check/Define data table address in controller.
When I look at the node address for the button and alarm, the addresses are matching the node cofiguration.
Does anyone have any suggestions on what else to try?
Thanks,
Todd.