I'm trying to display a "calculated finish time" based on a calculated thruput.
I have a value (hours)which represents my remaining time. This is a calculated value that is displayed as "1.25" for 1 hour 15 minutes.
Based on my clock (in the PLC) I need to "convert" this remaining time to a time value (hh:mm).
I can't seem to find an easy way to do this, so I was hoping somebody out there has a hint for this...
I have a value (hours)which represents my remaining time. This is a calculated value that is displayed as "1.25" for 1 hour 15 minutes.
Based on my clock (in the PLC) I need to "convert" this remaining time to a time value (hh:mm).
I can't seem to find an easy way to do this, so I was hoping somebody out there has a hint for this...