dmgonsior83
Member
Okay so I've hit a wall here. I'm working in Studio 5000 using Ignition as an HMI platform. The customer needs availability to store 50 recipes, data entered in on the HMI. I've created a UDT for all necessary recipe parameters and referenced this UDT in an array of 50 elements.
Once the customer enters in the recipe data to create a new recipe, they will press "store" and the data will be transferred to the array, incrementing by one. They will then select from a dropdown list on the HMI which recipe to pull up, and then hit "load" to execute. The dropdown list would be referencing the part number from the UDT.
Question is, if they select a part number from the dropdown list, how can this be referenced back to the array to pull the necessary information? Thanks in advance.
Once the customer enters in the recipe data to create a new recipe, they will press "store" and the data will be transferred to the array, incrementing by one. They will then select from a dropdown list on the HMI which recipe to pull up, and then hit "load" to execute. The dropdown list would be referencing the part number from the UDT.
Question is, if they select a part number from the dropdown list, how can this be referenced back to the array to pull the necessary information? Thanks in advance.