Is there a way in the G306 to use a tag to change the target address of the Allen Bradley DF1 protocol?
I'm trying to get to the point where AB or Crimson software is not required to change the IP addresses in the PLC (ML 1400) and HMI. I can change the IP address of the PLC through the LCD and I can change the HMI's IP address with a tag, but I don't believe that I can change the AB DF1 target IP address with a tag.
I'd also like to do the same thing with Modbus TCP/IP Master protocol.
I'm trying to get to the point where AB or Crimson software is not required to change the IP addresses in the PLC (ML 1400) and HMI. I can change the IP address of the PLC through the LCD and I can change the HMI's IP address with a tag, but I don't believe that I can change the AB DF1 target IP address with a tag.
I'd also like to do the same thing with Modbus TCP/IP Master protocol.