lllerena
Member
Did anyone have tried the Redundat Control Net over ControlLogix??
I have a ControlLogix (1) with 1756-CNBR modules (3 remotes chassis), also a Panel View 1000, two Power Flew (AC drives) and a flex I/O over thE ControlNet. I made it work fine (all comunicate). But how to make the second cable (Redundant?) work ? I do not see any configuration zone for the redundant.
When I disconect the "A channel" (cable) on the CL chassis (scanner?) it goes to error and loose the signals from the others equipments.
How to configure the Redundant ControlNet?
Thanks in advance
Luis
I have a ControlLogix (1) with 1756-CNBR modules (3 remotes chassis), also a Panel View 1000, two Power Flew (AC drives) and a flex I/O over thE ControlNet. I made it work fine (all comunicate). But how to make the second cable (Redundant?) work ? I do not see any configuration zone for the redundant.
When I disconect the "A channel" (cable) on the CL chassis (scanner?) it goes to error and loose the signals from the others equipments.
How to configure the Redundant ControlNet?
Thanks in advance
Luis