Hi,
We have a system setup using SLC 5/05 CPU, the question is can we add a redundant/backup ENET using Prosoft MV146-DFNT? So at the same time bothe the 5/05 and MV146-DFNT will transfer data to the HMI/SCADA. So when the 5/05 comm is lossed (line broken) then the HMI will pull data from the MV146-DFNT.
If anyone done this before, can you please let me know how's the addressing goes?
We have a system setup using SLC 5/05 CPU, the question is can we add a redundant/backup ENET using Prosoft MV146-DFNT? So at the same time bothe the 5/05 and MV146-DFNT will transfer data to the HMI/SCADA. So when the 5/05 comm is lossed (line broken) then the HMI will pull data from the MV146-DFNT.
If anyone done this before, can you please let me know how's the addressing goes?