Remote node database on local node in iFix 3.5 or Fix32 7.0

aju

Member
A
Join Date
Jan 2005
Posts
22
Hi guys.

I have a problem regarding remote node database.
There is a remote node and its datbase available
in PDB folder with node name as name and with ".tag " extension.

How can I access this database in my local node?

One more thing;
I have the database on my system itself. it just possess the
remote node name.
 

Similar Topics

D
System Platform remote view node via VPN
We have system platform SCADA GR node and a remote view node via VPN. We have confirmed connectivity between the computers over the VPN pool...
Replies
0
Views
1,187
Doron_Hassidim
D
G
ControlNet - only 1 remote node
With only one remote Flex I/O node communicating to a 1756-CNB, will only one segment terminated at both ends work? Or do I have to add an...
Replies
5
Views
1,579
GAJimbo
G
R
Wonderware intouch alarm remote node
Hi, Im using wonderware intouch and have set up 2 workstations. What i want to do is to have WS-2 to get the alarms from WS-1. Im using the...
Replies
1
Views
5,530
RobinH
R
R
AB SLC's node detection on Remote Network!!
At one of the sites, there are 35 SLC's on one DH+ network. Since it's causing overloading network, we are going to split the network into two...
Replies
0
Views
5,099
rahulkumardave
R
Z
SCADA Pack RTU 474, IO card (5606) Not responding in Remote Connect
Hi, We have been facing a issue with SCADAPack 474. Configuration is like below. RTU 474 + 6103 PS + 5606 IO Mix Module + 5414 DI Module Only...
Replies
0
Views
54
Zubairjaved786
Z
Back
Top Bottom