I have SLC 503 CPU which i am not able to access because of a password (there is no way to get this password) and
it is having a fault, I have the original program with me and I am thinking of resetting the CPU to its factory setting and then transferring this original program to the CPU, but before i do that i read in the manual that
I am worrying about the Communication settings, There is an HMI here, if i reset the CPU to factory setting and download original program to CPU will everything work,are communication settings also a part of the Program.
it is having a fault, I have the original program with me and I am thinking of resetting the CPU to its factory setting and then transferring this original program to the CPU, but before i do that i read in the manual that
If you return the processor to the initial factory conditions, the communication
configurations are returned to their default settings and the user program is
cleared.
I am worrying about the Communication settings, There is an HMI here, if i reset the CPU to factory setting and download original program to CPU will everything work,are communication settings also a part of the Program.
Last edited: