Shiro485
Member
Hello
I have a rfideas rfid reader ethernet/ip that I am trying to connect with a micrologix 1400 over ethernet/ip.
I was told this would work for that, but the manufacturer only has instructions on how to do this from rslogix5000
I found an article where someone got this working on a micro800 with cip messaging.
I am figuring it should work just the same with cip messaging via logix500?
Here is the article linked below....
https://www.scadaware.com/blog/pcprox-rfid-micro800/
In logix 500 I created a msg file
set to cip generic
created a data table n16:0 and n17:0 with a send size in 100 and recieve in 110
set service code to 14 or E in hex
Class 4
Instance 100
Attribute 3
And I keep getting connection timed out error.
Does anyone have any experience with this? Am I on the right track or completely wrong here?
Any help is much appreciated. I have tried calling Rockwell and RFIdeas and am coming up empty.
Thanks ☯
I have a rfideas rfid reader ethernet/ip that I am trying to connect with a micrologix 1400 over ethernet/ip.
I was told this would work for that, but the manufacturer only has instructions on how to do this from rslogix5000
I found an article where someone got this working on a micro800 with cip messaging.
I am figuring it should work just the same with cip messaging via logix500?
Here is the article linked below....
https://www.scadaware.com/blog/pcprox-rfid-micro800/
In logix 500 I created a msg file
set to cip generic
created a data table n16:0 and n17:0 with a send size in 100 and recieve in 110
set service code to 14 or E in hex
Class 4
Instance 100
Attribute 3
And I keep getting connection timed out error.
Does anyone have any experience with this? Am I on the right track or completely wrong here?
Any help is much appreciated. I have tried calling Rockwell and RFIdeas and am coming up empty.
Thanks ☯