Rockwell Integrated Architecture Builder

shoelesscraig

Member
S
Join Date
Apr 2009
Location
LA
Posts
382
Hey guys,
I'm new to Rockwell IAB. I was trying to use it to help me document the existing layout in a cusomer's plant. They have a 1756-L55 Controllogix processor and I do NOT see that as an option in the list of processors for Controllogix. But, they have all the REALLY old PLC5 in there. What am I missing? I made sure the program was up to date already, still no change...
 
Is it because IAB is used to design new systems? And create BOMs for that system? L55 processors are obsolete as well as most PLC5 equipment.
 
jkerekes is right. It will only have the new AB components it is not inteded to document any existing control systems. Its intention is help create BOM's for new PLC, Motion and Cabling systems.
 

Similar Topics

JesperMP
Can you upload the program from a Rockwell operator panel ?
Background for the question: A service man from a sub-supplier has made changes onsite to a Siemens PLC and HMI program. He has not made a backup...
Replies
7
Views
300
plvlce
P
B
Installing Rockwell Software
Hello all, I am an Industrial Electrician, and deal with a little bit of everything including PLC troubleshooting and programming. When I started...
Replies
3
Views
177
Operaghost
Operaghost
F
Rockwell PID to P_PIDE
I am working on a large migration of the standard PID instruction to the PlantPAx P_PIDE. Has anyone done a migration like this before and have a...
Replies
1
Views
181
FriedNickman
F
dalporto
Rockwell MVM Block
Hi all. What is the purpose of that block (MVM) when used with a 2#1111_1111_1111_1111 mask in that situation? I'm really hoping there is...
Replies
5
Views
185
drbitboy
drbitboy
K
Rockwell 1719 A24 Extension Rack
Customer is adding an extension rack to an existing A22. They wired and powered it up, I configured the new cards in the PLC starting from slot 23...
Replies
4
Views
162
JeffKiper
JeffKiper
Back
Top Bottom