Rockwell .rss to .slc to convert

JakeC

Member
Join Date
Dec 2023
Location
Aus
Posts
2
I'm trying to convert an RS Logix 500 fille when I open the 500 file and try to "save as" a .slc file, it does not allow it. It says " SLC library functionality is not available in this version"
(I am using a "Starter" version of 500 RSLogix Micro Starter Lite)

I am trying to get the Library File to open program in CCW.

Can anyone be able to save as for me and send back I would greatly appreciate it. :)
 
I'm having the same issue as the above. There is no reason you have to, but it would be very helpful if you could do the same with my file! Thanks in advance

Post it. Zip it first.
 
here..and a pdf
 

Attachments

  • 1100_slc.zip
    6.8 KB · Views: 1
  • 1100PROGRAM.pdf
    105.6 KB · Views: 1
Last edited:

Similar Topics

I have a RSlogix 500 I'm trying to convert to Rslogix 5000 and the utility wants a .slc file to work from. when I open the 500 file and try to...
Replies
1
Views
3,255
I don't know how long it has been available, but it looks like Knowledgebase has an RSS feed now http://rockwellautomation.custhelp.com/ Go to...
Replies
0
Views
3,987
Hi all. I have 1793-IE4 (4)analog inputs modules in a 1794-ADN IOFlex DeviceNet Rack. I cannot find if I can I have access to individual channel...
Replies
1
Views
21
Hi All, Wondering if anyone has a source for information about products with problematic production runs from allen bradley/rockwell. Ive seen...
Replies
2
Views
119
I have a PH meter that I am trying to bring its data into 1756-L81. I have downloaded the Rockwell MODBUS AOI kit, but I am not sure if I need to...
Replies
5
Views
182
Back
Top Bottom