I'm new to the world of RS232 Cable wiring, and am looking for some confirmation on how I'm doing this.
I'm trying to make a communication cable to go from a Fagor DRO to a PC. The diagram (Page 3 of the manual, DRO to 9pin PC) shows the PC end has two jumpers (4-6 and 7-8). Are these physical jumpers on the inside of the cable? I don't want to break my serial port on my laptop if I screw this up
BTW, this is a project I took from someone else, and they couldn't get their cable to work. I opened up their contectors and noticed no jumpers, and am wondering if that's why they couldn't get it to work.
I'm trying to make a communication cable to go from a Fagor DRO to a PC. The diagram (Page 3 of the manual, DRO to 9pin PC) shows the PC end has two jumpers (4-6 and 7-8). Are these physical jumpers on the inside of the cable? I don't want to break my serial port on my laptop if I screw this up
BTW, this is a project I took from someone else, and they couldn't get their cable to work. I opened up their contectors and noticed no jumpers, and am wondering if that's why they couldn't get it to work.