Trying to open an old project
It was Fix32 talking to a Contrologix L61
using Rslinx. I can not remember the ABR 7.x OPC driver setup
and something had to be done in Rslinx
So I have a Channel Named Pulpers
I have a Device Named Span
Primary Channel Setup on Pulpers is AB_ETH-1
which is setup in Rslinx ver 2.59
Enabled check box is set
Span Routing Setup is 1756-GTWY
Device Type PLC5
I am getting API calls timed out error
So what do I not remember
Thanks
It was Fix32 talking to a Contrologix L61
using Rslinx. I can not remember the ABR 7.x OPC driver setup
and something had to be done in Rslinx
So I have a Channel Named Pulpers
I have a Device Named Span
Primary Channel Setup on Pulpers is AB_ETH-1
which is setup in Rslinx ver 2.59
Enabled check box is set
Span Routing Setup is 1756-GTWY
Device Type PLC5
I am getting API calls timed out error
So what do I not remember
Thanks