Mickey
Lifetime Supporting Member
After rereading the manual for your output card the below statement bothers me a little. Not having used this card I'm not sure of its behavior during configuration and processor start-up. If you have trouble you might want to consider delaying the "SCP" instruction which rescales and writes the PID's out to the cards output word until the card has a chance to configure itself.
I may be reading to much into it but thought I would mention it anyway.
Hopfully someone comes along who has used this thing before.
Here is the manual for those wondering.
http://www.spectrumcontrols.com/pdfs/abio/0300246-01_A0_Manual_1762sc-OF8_.pdf
I may be reading to much into it but thought I would mention it anyway.
Hopfully someone comes along who has used this thing before.
Here is the manual for those wondering.
http://www.spectrumcontrols.com/pdfs/abio/0300246-01_A0_Manual_1762sc-OF8_.pdf
Last edited: